Features : AOD-25-PUMP

Specifications:
  • Max Flow Rate: 270 Lpm (72gpm)
Port Size:
  • Inlet: 38.10(1½ "" BSP)
  • Discharge: 38.10(1½ " BSP)
  • Air Inlet: 9.64mm ( 3/8" BSP)
  • Air Exhaust: 12.70mm (½" BSP)
Suction Lift:
    Dry: 4.57mm ( 15') Wet: 7.62mm (25')
Teflon:
  • Dry: 3.05mm( 10')
  • Wet: 6.09mm (20')
  • Max Particle Size (Dia.): 4.76mm (0.188")

MOCs Also Available in : SS 316,PP,PVDF, AL



AOD 25 POLYPROPYLENE

SR NODESCRIPTION PART NO M.O.C.
1LIQUID CHAMBER 2501 P.P.
2AIR COVER 2502 GFPP
   2502 ALU.
3SUCTION BEND 2503 P.P.
4DISCHARGE BEND 2504 P.P.
5SUCTION DISCHARGE TEE 2505 P.P.
6HOLDING PLATE 2506 M.S.
7LOCK NUT 2507 NEOPRENE
     TEFLON
8DIAPHRAGM 2508 NEOPRENE
     VITON
NITRILE
EPDM
BUTYL
TEFLON
SANTOPRENE
9BACKUP DIAPHRGM OF TEFLON 2509 NITRILE
10NRV BALLS 2510 TEFLON
   2510 NEOPRENE
11BALL SEAT 2512 P.P.
12SEAT "O" RING 2513 NEOPRENE
     VITON
13TEE "O" RING 2515 NEOPRENE
     VITON
14TEE CLAMPS 2516 M.S.
     S.S.
15SUCTION DISCHARGE CLAMP 2517 M.S.
     S.S.
16CHAMBER CLAMP 2518 M.S.
     S.S.
17SUCTION/DISCHARGE FLANGES 2520 P.P.
18SUCTION/DISCHARGE STUB END 2519 P.P.
19MOUNTING PADS 2521 NEOPRENE
20BALL CAGE 2524 P.P.
21CHAMBER CLAMP BOLTS CB2 S.S.
22SUCTION DISCHARGE CLAMP BOLT CB4 S.S.
23SUCTION DISCHARGE TEE CLAMP BOLT CB5 S.S.

AOD 25 AIR Assembly

SR. NODESCRIPTIONPART NOM.O.C.
1SHAFT BLOCK2551GFPP
2MAIN SHAFT2552STEEL
3PILOT BUSH2553BRASS
4PILOT SHAFT2554S.S.
5PISTON RING2568PLASTIC
6AIR COVER GASKET2555GRAPHITE
7PISTON BLOCK COVER GASKET2556GRAPHITE
8PISTON BLOCK GASKET2557GRAPHITE
9PISTON BLOCK COVER2559GFPP
10PISTON BLOCK CAP CIRCLIP2560STEEL
11PISTON BLOCK CAP2561HDP
12PISTON BLOCK2562GFPP
13PISTON2563ALUMINIUM
14PISTON BLOCK CAP "O" RING2564NEOPRENE
15PILOT BUSH "O" RING2565NEOPRENE
16EXHAUST2566GFPP
17PISTON "O" RING2567NEOPRENE
18AIR NIPPLE2569BRASS
19SHAFT BLOCK "O" RING2571NEOPRENE
20PILOT BUSH RING2572BRASS
21MAIN SHAFT BUFFER2573NEOPRENE
22PILOT SHAFT BUFFER2574NEOPRENE
23AIR COVER BOLTSLN3STEEL
24P.B. HOLDING BOLTSLN2STEEL

Our Products